Modular Buildings & Prefab Rooms —
What’s Included in the InPlant Package
A Complete Modular Building System,
Configured for Your Facility
InPlant modular buildings and modular rooms are designed as complete building systems—not simply a collection of wall panels.
Whether you need an in-plant office, equipment enclosure, partition, cleanroom, guard booth, or multi-story prefab building, InPlant configures the system around your facility, application, dimensions, and performance requirements.
Your package combines the structural Building System, Wall Panels, doors, windows, ceiling and roof components, trim, and other specified components needed to create your custom space.
Need help determining what your project requires?
Connect with my InPlant Representative >
Ask InPlant: 1.800.356.3199 >
What’s Included in an InPlant Modular Building Package?
Every project is customized, but a typical InPlant package is built from the following components:
The Structural Building System
The structural framework gives InPlant prefab buildings, prefab rooms, and partitions their strength and modular flexibility. InPlant’s manufactured components are prefabricated in our factory per the final drawing measurements so the system will fit your existing facility. A few items are cut long for precision fitting on site.
InPlant offers an economical non-load-bearing, and two stronger load-bearing wall systems, allowing the structure to be matched to the size, use, span, and load requirements of your project.
Depending on the application, systems are painted at InPlant. Or, the All-Purpose System components remain as satin-anodized aluminum.
Based on the structural requirements, the Building System can include:
- Wiring Studs
- Corner Posts
- Structural support beams when required
- Wall Starters
- Ceiling Cap and Trim
- Floor Track
- Vinyl Base Molding
- Roof Decking and structural roof components
WIRING STUDS
The supporting Wiring Studs are positioned at each Wall Panel junction—typically every four feet or less. They also function as accessible wiring raceways. Removable cover plates provide convenient access for electrical conduit and communication cabling while helping keep utilities organized within the wall system.
In load-bearing systems, often a few of the Wiring Studs are reinforced with structural posts to support heavier loads.
CORNER POSTS
InPlant Corner Posts incorporate the expandable and non-progressive design. This modular design makes it easier to configure—and potentially modify—your modular rooms as facility needs change.
The extruded anodized aluminum Corner Posts can be left silver, or painted to coordinate with your selected Wall Panels or custom color requirements.
WALL STARTERS
For single Partitions and two- or three-wall configurations, Wall Starters connect the Modular Wall System to an existing building wall, or used when adding Partitions to an existing Modular Building. They are anchored to the existing structure to securely position the leading Wall Panel.
FLOOR TRACK & VINYL BASE
Floor Track anchors the Modular Wall System to the existing floor.
Vinyl Base Molding covers the Floor Track along the interior and exterior of the Partition or rooms, and continues around outside corners for a clean. The Vinyl Base Molding creates a finished appearance and protects your system during routine floor cleaning.
CEILING CAP & TRIM
Ceiling Cap and metal trim finish the upper perimeter of the structure and conceal the edge of the roof deck.
See more details on the Modular Building System >
3-Inch Insulated Modular Wall Panels
Choose the Wall Panel construction that best fits the environment and purpose of your building. Wall Panels are prefabricated per order.
InPlant offers custom 3-inch thick Wall Panels that are insulated and non-combustible for offices, equipment enclosures, controlled environments, partitions, and other industrial applications.
Standard wall heights range from approximately 8 to 26 feet, with taller configurations available for specialized projects.
Your InPlant specialist can help match the appropriate Wall Panel construction with your requirements for appearance, insulation, sound control, durability, fire performance, and working environment.
View the Wall Panel Options >
Doors & Openings
InPlant Modular Buildings can accommodate a wide variety of personnel, equipment, material-handling, and production access requirements.
Standard options include pre-hung insulated steel swing doors, with single- and double-door configurations available.
Depending on your application, your package can also accommodate:
- Custom-size doors
- Panic exit hardware
- High-speed doors
- Manual roll-up doors
- Bump doors
- Sliding doors
- Strip doors
- Equipment openings
- Conveyor and material-handling openings
Because InPlant systems are custom configured, openings can be incorporated around conveyors, turntables, production equipment, and other facility components.
Windows & Viewing Panels
Standard window units use 1/4-inch tempered glass installed in aluminum frames and can span the width of a Wall Panel (standard height 41˝).
Alternative window sizes and materials are available to meet the functional requirements of the modular room, from office visibility to specialized protection required for safety enclosures.
Larger glass areas are frequently used in offices, mezzanine offices, and interior partitions where visibility is important.
Additional glazing options can include:
- Tinted glass
- Wire glass
- Laminated glass
- Insulated glass
- Acrylic
- Polycarbonate
- Specialized safety glazing
- Sliding windows
Roof Decks, Ceilings, & Lighting
InPlant prefab buildings typically use corrugated steel roof decking to provide a strong structural roof surface.
Depending on the application, additional decking or overlay materials can include OSB, plywood, tread plate, or other specified materials.
For finished interior spaces, suspended acoustic ceilings can be installed below the structural deck. Standard ceiling systems can accommodate recessed 2′ × 4′ lighting fixtures, while specialized lighting can be incorporated when required.
WIDE-SPAN & LOAD-BEARING SYSTEMS
Need a large open area or usable space above your building?
InPlant offers structural systems for both wide-span and load-bearing wall applications.
Certain non-load-bearing building configurations can span up to approximately 40 feet without intermediate support columns.
For applications requiring rooftop storage or production space, heavier structural systems can be reinforced with recessed I-beams. Depending on the engineered configuration, these systems can support loads up to 125 pounds per square foot.
Your system is engineered according to the dimensions, loads, application, and requirements of your specific project.
Package Options
The following components can be incorporated into your InPlant building package based on your project requirements.
ELECTRICAL
Electrical components can be incorporated into the prefab room during installation.
Typical packages may include:
- Circuit breaker panels
- Single-pole and 3-way switches
- Duplex and specialty outlets
- Lighting fixtures
- Electrical boxes and related components
Standard circuit breaker panels are typically 125A panels with 70A main breakers and can be upgraded according to the electrical requirements of the building.
InPlant also offers a modular wiring option that connects pre-wired lights and outlets to a junction box near the load center.
Field wiring, conduit, communication cabling, final connections, and related electrical work are generally provided by the appropriate electrician or technician on site.
HEATING & AIR CONDITIONING
For many smaller modular rooms, a self-contained HVAC wall unit can be installed and connected to an adjacent dedicated electrical outlet.
Larger modular buildings can be fabricated with additional plenum space to accommodate central HVAC ductwork.
HVAC requirements are determined by room size, use, location, occupancy, and environmental requirements.
FLOORING
Flooring requirements depend on the type of building.
For two-story modular complexes, vinyl tile is typically supplied as the standard finished flooring for the upper level, with carpet and other materials available.
The existing facility floor normally serves as the floor for ground-level modular offices and rooms unless another flooring option is specified.
STAIRS, RAILINGS & ACCESS SYSTEMS
For elevated and multi-level prefab buildings, InPlant can provide access components including:
- Prefabricated stair systems
- Ladders
- Handrails
- Safety gates
- Other required access components
More detailed specifications can be provided for approval when required.
One Modular System—Configured Around Your Application
Not every facility needs the same Modular Building package.
A small shipping office has very different requirements from a two-story office complex, large equipment enclosure, controlled environment, or load-bearing wall structure.
That is why InPlant does not force every project into a standard package.
We help determine the combination of Building System, Wall Panels, doors, windows, electrical components, HVAC provisions, ceilings, flooring, and structural options appropriate for your application.
From a single Partition or Prefab Room to large multi-story Modular Buildings, InPlant’s goal is the same:
To provide the appropriate components needed to install a modular space designed to fit your facility and your operation.
Tell Us What You Need to Build
Have a floor plan, dimensions, sketch, photo, or simply an idea?
Send it to InPlant. We’ll help determine the appropriate system and package components for your project.
Have a sketch, dimensions, drawing, or simply an idea?
That’s enough to start.